TYSSO Programmable POS Keyboard

-18- -19- 5. Bar Code Reader Setting (Optional) On the menu bar, click "Keyboard" and then "Bar Code Reader Setting", or on the toolbar, click icon, the following dialogue window will appear, Header and Suffixes can be programmed similar to normal buttons on the keyboard, click on the ASCII or Code to bring up the window for input. After finishing the settings you like, you can press "Update" button to send these settings to the keyboard and then the dialogue window will be automatically closed. Or you can press "OK" button to save the setting in the program memory and then the dialogue window will be automatically closed. 6. Firmware Update (Only for PS2 keyboard) 7. Diagnostic On the menu bar, click "Keyboard" and then "Update Firmware", or on the toolbar, Click icon, it will ask you the location of the firmware file. The key pressed will show its key position. (For testing the keyboard only) If your keyboard has key lock and the repeat feature is turned on, the keyboard will continuously send the key lock position. To stop this, you can press any other key. The key pressed will show the code programmed. The keyboard only. (For testing the keyboard only) Get the current version of the firmware. During the updating process, please do not press any key on the keyboard. i. Enter Test Mode ii. Exit Test Mode iii. Reset iv. Firmware Version

Index | Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12