-19-
-18-
6.2.4. Set cursor position
6.2.5. Clear display range
6.2.6. Display the saved DEMO message
COMMAND: P
COMPUTER: EOT SOH
'P' 'Position'
ETB
ASCII (04H) (01H) (50H) (31H~58H)
(17H)
Byte 1
1 1
1 1
DISPLAY: ACK
(or NACK if failed)
ASCII (06H)
(15H)
Byte 1
1
COMMAND: C
COMPUTER: EOT SOH 'C' 'START'
'END' ETB
ASCII
(04H)(01H)(43H)(31H~58H)(31H~58H)(17H)
Byte 1
1 1
1 1
1
DISPLAY: ACK
(or NACK if failed)
ASCII (06H)
(15H)
Byte
1 1
Note: Some part of the current view
messages can be cleared by
this COMMAND. It can start clearing
between position 1
and position 40.
COMMAND: D
COMPUTER: EOT SOH 'D'
'Layer' 'Mode'
ETB
ASCII
(04H)(01H)(44H)(31H~37H)(31H~33H)(17H)
Byte 1
1 1
1 1
1
DISPLAY: ACK
(or NACK if failed)
ASCII (06H)
(15H)
Byte 1
1
Note: The cursor can be set to the
position from 1 to 40
Position 1 means the upper left corner
position.
Position 20 means the upper right corner
position.
Position 21 means the lower left corner
position.
Position 40 means the lower right corner
position.
Note:
1) There are three layers of saved view
messages as described
on COMMAND "S"
2) There are two modes of display:
Mode 1 is running the saved messages from
right to left,
which is a horizontal scroll mode.
Mode 2 is running the saved messages from
the lower line to
the upper line, which is a vertical
scroll mode.
3) For display layers:
select 31H means display the message
saved on layer 1.
select 32H means display the message
saved on layer 2.
select 33H means display the message
saved on layer 1+
layer 2.
select 34H means display the message
saved on layer 3.
select 35H means display the two messages
saved on layer 1
+ layer 3.
select 36H means display the two messages
saved on layer 2
+ layer 3.
select 37H means display all the messages
saved on layer 1
+ layer 2 + layer 3.
4) For display modes,
select 31H means display the message with
Mode 1.
select 32H means display the message with
Mode 2.
select 33H means display the message with
Mode 1+Mode 2.
For this Demo display function, you must
have saved the
message by COMMAND "S" previously, For
example, select
37H for displaying layers and select 33H
for displaying
modes, DSP would display all the three
messages saved on
layer 1+ layer 2 + layer 3 with both Mode
1 + Mode 2
displaying modes.
5) Any new message from the computer
would stop this Demo
display function and DSP would display
that new message
from the computer.
Page Index: 1
2 3
4 5
6 7
8 9
10 11
12 13
14 15
16 17
18 19 >
Download PDF version
::
Customer Display FAQ
:: Specifications ::
Software Download
Customer Display
Index: VFD
| LCD |
Arabic & Chinese Display |
Double Side Display
TYSSO Product Links:
Barcode Scanner |
Magstripe Card Reader
/ Writer |
POS Customer Display |
POS Keyboard
Touchscreen POS System
| Cash Drawer |
Serial-Ethernet
Converter | Links to Other Sites
Home
| Contact
